Availability: | |
---|---|
Quantity: | |
Chicken manure dryer is a low-energy, high-efficiency drying equipment, widely used in the rapid drying of high-humidity organic waste materials in livestock and poultry breeding, brewing, sugar, papermaking and other industries, and can reduce the initial moisture content to less than 70% The high-humidity materials are dried at one time to a final moisture content of less than 15%, achieving the purpose of rapid drying and nutrient preservation at one time.
INTRODUCTION
1. Uses and features:
The chicken manure dryer is suitable for the rapid drying of high-humidity materials such as organic fertilizer, corn residue, medicine residue, vinasse residue, pomace, and pasture after fermentation. It has large evaporation and low coal consumption. , The advantages of high drying efficiency. It is equipment for pretreatment of municipal solid waste and drying of feces.
Equipment features: novel design, compact structure, simple operation, high drying efficiency, low operating cost, small footprint; the drum is equipped with a high-speed rotating internal crushing device, which increases the contact area between the material and the drying medium, and the heat It has sufficient mass exchange, good heat preservation and sealing, and its thermal efficiency is much higher than that of ordinary drum dryers. Both drum and crushing device adopt stepless speed regulation, which can adapt to the drying requirements of different materials.
WORKING THEORY
The high-humidity material is directly sent to the chicken manure dryer by the feeding screw conveyor, and is repeatedly picked up and scattered by the copying plate on the inner wall of the drum. After being broken up by the crushing device, the material is fully exposed to the high-temperature medium under negative pressure. Contact to complete the heat and mass exchange process. Due to the inclination angle of the drum and the action of the induced draft fan, the material moves slowly from the feed end, and is discharged by the discharge screw conveyor after drying. The tail gas is discharged by the cyclone dust collector after being dusted.
TECHNICAL-PARAMETERS
TYPE | D-25 | D-38 |
POWER KW | 7.5kw | 15KW |
CAPACITY of waster drying KG/H | 40-50kg/h | 80-120KG/H |
SIZE M | 3.8x1.5x1.8 | 4.6x1.68x2 |
PRDUCTION PERIOD | 25 DAYS | 35DAYS |
WORKSHOP ANDCUSTOMERVISIT
Chicken manure dryer is a low-energy, high-efficiency drying equipment, widely used in the rapid drying of high-humidity organic waste materials in livestock and poultry breeding, brewing, sugar, papermaking and other industries, and can reduce the initial moisture content to less than 70% The high-humidity materials are dried at one time to a final moisture content of less than 15%, achieving the purpose of rapid drying and nutrient preservation at one time.
INTRODUCTION
1. Uses and features:
The chicken manure dryer is suitable for the rapid drying of high-humidity materials such as organic fertilizer, corn residue, medicine residue, vinasse residue, pomace, and pasture after fermentation. It has large evaporation and low coal consumption. , The advantages of high drying efficiency. It is equipment for pretreatment of municipal solid waste and drying of feces.
Equipment features: novel design, compact structure, simple operation, high drying efficiency, low operating cost, small footprint; the drum is equipped with a high-speed rotating internal crushing device, which increases the contact area between the material and the drying medium, and the heat It has sufficient mass exchange, good heat preservation and sealing, and its thermal efficiency is much higher than that of ordinary drum dryers. Both drum and crushing device adopt stepless speed regulation, which can adapt to the drying requirements of different materials.
WORKING THEORY
The high-humidity material is directly sent to the chicken manure dryer by the feeding screw conveyor, and is repeatedly picked up and scattered by the copying plate on the inner wall of the drum. After being broken up by the crushing device, the material is fully exposed to the high-temperature medium under negative pressure. Contact to complete the heat and mass exchange process. Due to the inclination angle of the drum and the action of the induced draft fan, the material moves slowly from the feed end, and is discharged by the discharge screw conveyor after drying. The tail gas is discharged by the cyclone dust collector after being dusted.
TECHNICAL-PARAMETERS
TYPE | D-25 | D-38 |
POWER KW | 7.5kw | 15KW |
CAPACITY of waster drying KG/H | 40-50kg/h | 80-120KG/H |
SIZE M | 3.8x1.5x1.8 | 4.6x1.68x2 |
PRDUCTION PERIOD | 25 DAYS | 35DAYS |
WORKSHOP ANDCUSTOMERVISIT